Panasonic WJ-GXE500E Webcam User Manual


  Open as PDF
of 73
 
61
•Is"Allow"selectedfor"FTPaccesstounit"onthe
[Network]tabof"Network"page?
It is necessary in advance to select "Allow" for "FTP
access to unit" on the [Network] tab of the "Network"
page.
•IstheviewersoftwareinstalledonthePC?
Install the viewer software on a PC.
•IstheversionofDirectX9.0corlater?
Check the version of DirectX as follows.
(1) Select "Run…" from the start menu of Windows.
(2) Enter "dxdiag" in the displayed dialog box and
click the [OK] button.
If the version of DirectX is older than 9.0c, upgrade it.
Cannot obtain images on
the SD memory card.
No image is displayed.
Cannot access from the
web browser.
54
4
–
•Istheenteredpasswordcorrect?
Restart the web browser and enter the password
again.
•AccesstotheSDmemorycardmaybefailed.Restart
the browser and retry to obtain images.
50
–
•IsthesameIPaddressprovidedtootherdevices?
Are there contradictions between the address and the
networksubnettobeaccessed?
<When the unit and the PC are connected in the same
subnet>
Are the IP addresses of the unit and the PC set in a
commonsubnet?Oris"UseProxyServer"fortheset-
tingsofthewebbrowserchecked?
When accessing the unit in the same subnet, it is rec-
ommended to enter the address of the unit in the
"Don’t Use Proxy For These Addresses" box.
<When the unit and the PC are connected in the dif-
ferent subnet>
Is the IP address of the default gateway set for the unit
correct?
–
Reference
pages
Cause/solution
Symptom
 previous next