Panasonic WJ-GXE500E Webcam User Manual

Open as PDF

of 73

Important:

 •Toenhancethesecurity,changethepasswordfortheuser"admin".Itisrecommendedtochangethispass-

word periodically.

 •WhendisplayingmultipleH.264(orMPEG-4)imagesonaPC,imagesmaynotbedisplayeddependingonthe

performance of the PC.

Note:

 •When"H.264"isselectedfor"Videoencodingformat",H.264videowillbedisplayed.When"MPEG-4"is

selected, MPEG-4 images will be displayed.

 •Whenmultipleusersarereceivingaudio,theframerateofH.264(orMPEG-4)imagesortherefreshintervalof

JPEG images may be lower than the specified value.

 •Themaximumnumberofconcurrentaccessuseris14includinguserswhoarereceivingH.264(orMPEG-4)

images and users who is receiving JPEG images. Depending on the set values for "Bandwidth control (bit rate)"

and "Max bit rate (per client) *", the maximum concurrent access number may be less than 14 users. When 14

users are concurrently accessing, the access limit message will be displayed for users who subsequently

attempt to access. When "Multicast" is selected for "Transmission type" of "H.264" (or "MPEG-4"), only the first

user who accessed to monitor H.264 (or MPEG-4) images will be included in the maximum number. The second

and subsequent users who are monitoring H.264 (or MPEG-4) images will not be included in the maximum num-

ber.

 •When"On"isselectedfor"H.264transmission"(or"MPEG-4transmission")(☞ pages 34 to 40), H.264 (or

MPEG-4) images will be displayed. When "Off" is selected, a JPEG image will be displayed. It is possible to dis-

play a JPEG image even when "On" is selected for "H.264" (or "MPEG-4 transmission").

 •Therefreshintervalmaybecomelongerdependingonanetworkenvironment,PCperformance,photographic

subject, access traffic, etc.

When "Ch1 only" is selected for "Ch selection"

When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission")