Panasonic WJ-GXE500E Webcam User Manual


  Open as PDF
of 73
 
5
Monitor images on a PC
The following are descriptions of how to monitor images from the camera on a PC.
Monitor images from a single camera
Important:
•WhentheHTTPportnumberischangedfrom"80",
enter"http://IPaddressoftheunit+:(colon)+port
number" in the address box of the browser.
Example:Whentheportnumberissetto"8080"
http://192.168.0.11:8080
•Whentheunitisinalocalnetwork,configurethe
proxy server setting of the web browser (under
"Internet Options…" under "Tools" of the menu bar)
to bypass the proxy server for the local address.
Step 3
Press the [Enter] key on the keyboard.
→ The "Live" page will be displayed. Refer to page 7
for further information about the "Live" page.
When "On" is selected for "User authentication", the
authentication window will be displayed before display-
ing live images for the user name and password entries.
The default user name and password are as follows.
Username: admin
Password: 12345
Step 1
Start up the web browser.
Step 2
Enter the IP address designated using the Panasonic
Easy IP Setup software in the address box of the
browser.
Example when entering an IPv4 address:
http://URLregisteredusingIPv4address
http://192.168.0.10/
Example when entering an IPv6 address:
http://URLregisteredusingIPv6address
http://[2001:db8::10]/
<Example of IPv4 access>
<Example of IPv6 access>
 previous next