Filter
Top Products
2. BitStorm 1900 Installation and Testing
2-92 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00
Step Procedure (continued)
8.) If any of the information needs to be modified, type:
ifconfig -m 0 and press <Enter>.
9.) The screen above displays indicating you are connected remotely
to the MIU and asks if you would like to change the
IP address of
the MIU. Press
y .
10.) From this screen changes to the I.P. Address, Current Subnet
Mask, MTU, and Set Default Gateway can be made. If there is no
change, press
<Enter> to continue to the next item. Do not
change the MTU or MSS settings.