Filter
Top Products
2. BitStorm 1900 Installation and Testing
2-78 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00
PING Enter to verify if an I.P. Address is valid.
RESET Use to Reset or Reboot the system.
(It is not advised to power down the system in order to perform
a reset of the system.)
SNMP Enter to review and/or modify the current SNMP configuration.
SYSINFO Enter to access and review system information.
TIME Enter to set the time.
VERSION Enter to view the version of firmware currently loaded on the
MIU.
Table 2-3: CLI (Command Line Interface) Commands
CLI Commands
Command Description