Filter
Top Products
2. BitStorm 1900 Installation and Testing
2-74 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00
Step Procedure (continued)
4.) Set the serial COM1 port terminal communication settings.
a.) Initiate a Terminal Session using terminal emulation software
(i.e., Hyperterminal).
b.) Select the appropriate serial
COM port from the pull down
menu (i.e., COM1, COM2, etc).
c.) Verify the port settings are the same as shown in Figure 2-19,
"COM Port Settings." and click
OK.
Figure 2-19: COM Port Settings