Paradyne 3160 Network Card User Manual


 
IN-1
3160-A2-GB21-80 March 1999
Index
A
abort
lamp test, 4-36– 4-38
loopback, 4-29– 4-38
test patterns, 4-34– 4-38
ac power module, 1-7, B-1
ACAMI method of channel allocation, 3-40– 3-68
Activ (Active) configuration area, functional description,
3-14
addressing.
See
IP (Internet Protocol) addressing
agent, SNMP, 1-3
AIS (Alarm Indication Signal) condition
ASCII terminal/printer message, 4-11
Device Health and Status message, 4-4
front panel LED indication, 3-7, 3-8
troubleshooting, 4-15
Alarm Configuration branch
example of use, 3-26– 3-68
option table, C-27– C-52
option worksheet, C-43
alarm messages.
See
messages, alarm
allocation, DS0 channel.
See
channel allocation
AMI (Alternate Mark Inversion), C-2
applications, 2-1– 2-10
ASCII terminal/printer
cabling example, 2-8
used for alarm messages, 1-2
authenticationFailure trap, 4-12
AUX Port
configuration option, C-26
functional description, 1-7
physical description, 1-5, 1-6
pin assignments, D-5– D-16
used with SNMP system, 1-3, 2-3, 3-20, F-1
B
B8ZS (Bipolar Eight Zero Substitution) coding
configuration option, C-2, C-8
Self-Test Health message, 4-2
backup capability, 3-45– 3-68
BES (Bursty Errored Seconds) report, 4-9
block method of channel allocation, 3-40– 3-68
BPV (Bipolar Violation) condition
front panel LED indication, 3-8
Performance Report message, 4-10
troubleshooting, 4-15
C
cabling
examples, 2-8
pin assignments, D-1– D-16
Chan (Channel) Configuration branch
example of use, 3-29– 3-68
option table, C-10– C-52
option worksheet, C-46, C-47, C-49, C-50
channel allocation
configuration options, C-10– C-52
procedure for configuring, 3-29– 3-68
CID (Customer Identification) branch, example of use,
3-11– 3-68
Circuit Identifier configuration option, C-10
CLOCK IN interface
functional description, 1-7, 3-46
physical description, 1-5, 1-6
pin assignments, D-16
clocking
configuration options, C-16
principles of operation, 3-45– 3-68
technical specifications, B-2
ClrReg (Clear Performance Registers) branch, example
of use, 4-8– 4-38
Cnfig (Configuration) branch.
See
configuration options
coding, line, C-2
COM Port
acquiring/releasing the user interface, 3-51– 3-68
cabling example, 2-8
configuration option, C-19
functional description, 1-7
physical description, 1-5, 1-6
pin assignments, D-6– D-16
used with ASCII terminal/printer, 2-8, 4-11
used with SNMP system, 1-3, 2-3, 3-20, F-1
COM port, reset, H-1
community name
configuration option, C-32
procedure for configuring, 3-24– 3-68