Filter
Top Products
Operation
3-49
3160-A2-GB21-80
March 1999
4. From the Edit screen, press the key until the User selection appears on
the screen.
5. Select User.
F1
Edit:
Chan Gen User
F2
F3
6. Press F1 (Next) until the Password configuration option appears.
7. Select port(s) to receive access security (None, Com, Modem, or Both). Use
the scroll keys, if necessary.
F1
Password:None
Next None Com
F2
F3
Setting a Password
In addition to establishing access security on a port (refer to the previous section,
Establishing Access Security on a Port
) the password itself is set. Unless you
specify otherwise, the password is null.
" Procedure
To set a password:
1. From the top-level menu screen, press the key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the
key until the Passwd selection
appears on the screen.
4. Select Passwd.
F1
Control:
Reset CID Passwd
F2
F3