Filter
Top Products
Operation
3-43
3160-A2-GB21-80
March 1999
6. From the Channel Config screen, select DTE.
F1
Channel Config:
Dsply Clear DTE
F2
F3
7. From the DTE Channels screen, press F1 to select Assign.
F1
DTE Channels:
Assign Voice
F2
F3
8. Press the Function key below the network channel desired. Each time that
you press the Function key, the DTE channel number will scroll up one
number. If the network channel is currently unassigned (‘‘–” is displayed on
Line 2), the DTE channel number initially displays the same number as the
corresponding network channel number. However, if the network channel is
currently assigned, the DTE channel number is shown as D
n.
Pressing the
Function key for D24 wraps the display back to D1. Only those channels that
are not already assigned will appear on the LCD when scrolling. The network
channels assigned to ports (Prt1...Prt4) are unavailable for assignment.
F1
N1 N2 N3
D1 D2 –
F2
F3
" Procedure
To specify DTE Drop/Insert (DSX-1) channels used to carry voice information,
1. Press from the channel allocation screen to return to the DTE Channels
screen.
F1
N1 N2 N3
D1 D2 –
F2
F3