Filter
Top Products
Index
IN-5
3160-A2-GB21-80 March 1999
Q
QRSS Test, 4-30
R
rate
auxiliary port, C-26
communications port, C-23
external clock, C-17
synchronous data port, C-13
rear panel
connectors.
See
connectors, rear panel
physical description, 1-5– 1-7
Rel (Release) branch, example of use, 3-53– 3-68
remote loopback, 4-19– 4-38
repeater loopback (RLB), 4-26– 4-38
reset
async terminal operation, H-1
front panel indications, 2-9
procedure, 3-65
Reset branch, example of use, 3-65– 3-68
Rlpbk (Remote Loopback) branch, example of use,
4-19– 4-38
router applications, 2-2
RS-449 interface, D-10
S
self-test
displaying results, 4-1– 4-38
front panel indications, 2-9, 3-6
troubleshooting, 4-14
Send Ones configuration option, C-3, C-4
serial crossover cable, D-14
Serial Line Internet Protocol (SLIP)
procedure for configuring, 3-23
used with SNMP system, 1-3, 2-3, 3-20, F-1
SES (Severely Errored Seconds) report, 4-9
Shared Diagnostic Control Panel (SDCP)
acquiring/releasing the user interface, 3-51– 3-68
physical description, 3-1
SNMP (Simple Network Management Protocol)
agent, 1-3
configuration options
examples of use, 3-19– 3-68
option table, C-31– C-52
option worksheet, C-51
connection examples, 2-3– 2-10, F-1– F-6
database, 1-3
IP addressing, F-1– F-6
manager, 1-3
MIBs
functional description, E-1– E-32
list of objects, E-1– E-32
procedure for configuring access, 3-24– 3-68
objects, 1-3
principles of operation, 1-3
SNMP Down message, 4-4, 4-15
traps
functional description, 1-3, 4-12– 4-38
procedure for configuring, 3-26– 3-68
specifications, environmental, B-1– B-2
Stat (Status) branch, examples of use, 3-9, 3-13, 4-1,
4-3, 4-6, 4-37
status messages.
See
messages, status
STest (Self-Test Health) branch, example of use, 4-1–
4-38
StEvnt (Status Event) report, 4-10
straps.
See
configuration options
subnet, 3-19, C-34, C-36, F-2
synchronous data port.
See
PORT (1–4) interface
T
T1
line, D
network, connection, D
technical specifications, B-1– B-2
Test branch, example of use, 4-19– 4-38
test commands, 4-19– 4-38
front panel LED indications, 3-6
lamp test, 4-35– 4-38
local loopback, 4-22– 4-38
abort, 4-29– 4-38
data channel loopback (DCLB), 4-27– 4-38
data terminal loopback (DTLB), 4-28– 4-38
DTE loopback (DLB), 4-25– 4-38
line loopback (LLB), 4-23– 4-38
payload loopback (PLB), 4-24– 4-38
repeater loopback (RLB), 4-26– 4-38
remote loopback, 4-19– 4-38
test messages, 4-37– 4-38
test patterns, 4-30– 4-38
test jacks
functional description, 4-17– 4-38
physical description, 1-3, 3-1, 3-4