Paradyne 3160 Network Card User Manual


 
Operation
3-60
3160-A2-GB21-80
March 1999
Disconnecting the Modem Connection
The Disconnect command enables you to force a disconnect of an active modem
connection from the front panel of the DSU/CSU. This command is only available
when the DSU/CSU modem is connected.
Disconnect methods include:
H Using the Disconnect command via the front panel menu (for all dial
connections, or when a pass-through connection is established to another
316x DSU/CSU).
H Pressing and holding the
and front panel keys simultaneously (when
a pass-through connection is established to a remote device other than a
316x DSU/CSU).
" Procedure
To disconnect an established modem connection using the Disconnect command:
1. From the top-level menu screen, press the key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select Call.
F1
Control:
Call Rel LED
F2
F3
4. From the Call Setup screen, select Disc.
F1
Call Setup:
Disc ChDir
F2
F3
The modem call is disconnected and the Command Complete screen
appears.
F1
Disconnect:
Command Complete
F2
F3