Paradyne 3160 Network Card User Manual


 
Index
IN-2
3160-A2-GB21-80
March 1999
configuration options
procedure for changing, 3-14– 3-68
tables
Alarm, C-27– C-52
Channel, C-10– C-52
DTE Interface, C-2– C-52
General, C-16– C-52
Network Interface, C-8– C-52
Port, C-3– C-52
SNMP, C-31– C-52
User Interface, C-18– C-52
worksheets, C-41– C-52, H-15
connectors, rear panel
cabling examples, 2-8
functional description, 1-7
physical description, 1-5, 1-6
pin assignments, D-1– D-16
CPU failure message, 4-2
crossover cable, D-14
CSS (Controlled Slip Seconds) report, 4-9
Ctrl (Control) branch, examples of use, 3-11, 3-12,
3-49, 3-53, 3-55, 3-58, 3-59, 3-60, 3-64, 3-65,
4-8
Cust1 (Customer 1) configuration area, functional
description, 3-14
Cust2 (Customer 2) configuration area, functional
description, 3-14
cyclic redundancy check (CRC), error indication, 4-8
D
daisy chaining
configuration options, C-19, C-26
connectivity, 1-7, 2-3, 2-4
data channel loopback (DCLB), 4-27– 4-38, C-4
data port.
See
PORT (1–4) interface
data terminal loopback (DTLB), 4-28– 4-38, C-4
database, SNMP, 1-3
dc power option, 2-5– 2-10, B-1, D-15– D-16
default configuration options, C-2
DevFail (Device Failure) message, 4-4
DevHS (Device Health and Status) branch, example of
use, 4-3– 4-38
dimensions, B-2
DL (Download) branch, operation, 3-65
DS0 channel allocation.
See
channel allocation
DTE (Drop/Insert) interface.
See
DTE Drop/Insert
interface
DTE Configuration branch
option table, C-2– C-52
option worksheet, C-41
DTE Drop/Insert interface
channel allocation procedure, 3-29– 3-68
configuration options, C-2– C-52
failure message, 4-2
functional description, 1-2– 1-8, 2-1
managed by SNMP, E-1
physical description, 1-5, 1-6
pin assignments, D-3– D-16
technical specifications, B-1
troubleshooting, 4-14
DTE loopback (DLB), 4-25– 4-38
configuration option, C-3
external control interface, D-3
E
EER (Excessive Error Rate) condition
ASCII terminal/printer message, 4-11
Device Health and Status message, 4-4
front panel LED indication, 3-7, 3-8
Performance Report message, 4-10
troubleshooting, 4-15
EIA 530A interface, D-8
Embedded Data Link (EDL)
configuration option, C-6, C-7
used with SNMP system, 1-3, 2-3, 2-4, F-1
enterprise-specific trap, 4-12
environmental specifications, B-2
equalization, line, C-2
error messages.
See
messages, alarm
ES (Errored Seconds) report, 4-9
external modem interface, D-14
F
Facility Data Link (FDL)
configuration option, C-8
used with SNMP system, 1-3, 2-3, 2-4, F-2
Facility Interface Code, D
Facility Interface Codes, D
Fact1 (Factory 1) configuration area, functional
description, 3-14
Fact2 (Factory 2) configuration area, functional
description, 3-14
failure analysis.
See
troubleshooting
failure message
during power-up self-test, 2-10, 4-4
troubleshooting, 4-15