Filter
Top Products
Operation
3-18
3160-A2-GB21-80
March 1999
Selecting/Copying to a Specific Port
For the DSU/CSU, you have the capability of selecting a specific port to
configure, and then (for 2-port and 4-port DSU/CSUs) copying the configuration
options from that port to another port (or to all ports).
NOTE:
The following procedure is an example only. Screen displays may vary
depending on the model and configuration of the DSU/CSU.
" Procedure
To select a specific port to configure:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, select Port.
F1
Edit:
DTE Port NET
F2
F3
5. From the Port Select screen, press the Function key that corresponds to the
port you want to configure. Use the key to scroll addition ports onto the
screen, if necessary. Configure the port (see Appendix C,
Configuration
Options
).
F1
Port Select:
Copy Prt1 Prt2
F2
F3