Filter
Top Products
Initial Startup and Configuration
3-12
7984-A2-GB20-10
February 1999
Configuration Edit/Display
The Configuration Edit/Display screen is displayed when the current, customer, or
default configuration is loaded. To access the Configuration Edit/Display screen,
follow this menu selection sequence:
Main Menu
→
Configuration
→
Current Configuration
–
or –
Main Menu
→
Configuration
→
Default Factory Configuration
main/config/edit Hotwire
Model: 7984
CONFIGURATION EDIT/DISPLAY
Network
DSX-1
System Options
Communication Port
Management and Communication
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
S
ave
See Appendix A,
Configuration Option Tables
, for a list and explanation of the
configuration options available.
Select . . .
To Access the . . . To Configure the . . .
Network Network Interface Options, Table A-1 DSL network interface on
the unit.
DSX-1 DSX-1 Interface Options, Table A-2 DSX interface.
System
Options
System Options, Table A-3 General system options of
the unit.
Communication
Port
Communication Port Options, Table A-4 Unit’s COM port options.
Management
and
Communication
H Telnet Session Options, Table A-5
H Communication Protocol Options,
Table A-6
H General SNMP Management
Options, Table A-7
H SNMP NMS Security Options,
Table A-8
H SNMP Traps Options, Table A-9
Management support of the
unit through SNMP and
Telnet.