Paradyne HOTWIREt 7984 Network Card User Manual


 
8-1
7984-A2-GB20-10
February 1999
IP Addressing
8
Selecting an IP Addressing Scheme
The NTU’s network interface IP address is assigned through the peer IP address
of the LTU’s Network Interface menu. The NTU obtains the LTU’s IP address
when the PPP link is established over the EOC. The LTU IP address and subnet
mask are configured from the Communication Protocol Options menu.
The 7984 Standalone Termination Unit is assigned an IP address through the
Peer IP address of the M/HDSL Network interface menu. The 7984 Standalone
Termination Unit can also be assigned an IP address and subnet mask for the
COM port. Once an address is assigned, you can manage the 7984 Standalone
Termination Unit’s ATI to assign an:
H IP address for each NMS to act as a trap manager. See Table A-9, SNMP
Traps Options, in Appendix A,
Configuration Option Tables
.
H IP address for the TFTP server you wish to use to upload and download
configurations. See
Configuration Loader
in Chapter 3,
Initial Setup and
Configuration
.
Review the following information in preparation for selecting an IP addressing
scheme.
H Any legal host address is allowed for a given subnet. The address choice
within the subnet is arbitrary.
H A single route to a subnet is all that is needed to reach every device on a
subnet.