Filter
Top Products
Security
7-4
7984-A2-GB20-10
February 1999
Deleting a Login
" Procedure
1. To delete a login record, follow this menu selection sequence:
Main Menu
→
Control
→
Administer Logins
2. Select PgUp or PgDn and press Enter to page through login pages/records
until you find the one to be deleted.
3. Once the correct record is displayed, select Del
ete and press Enter.
4. To complete the delete action, select S
ave and press Enter.
When the deletion is complete, Command Complete appears at the bottom
of the screen. The number of login pages/records reflects one less record,
and the record following the deleted record appears.
Controlling SNMP Access
There are three methods for limiting SNMP access.
H Disable the SNMP management option. Refer to Table A-8, General SNMP
Management Options.
H Assign SNMP community names and access types.
H Limit SNMP access through validation of the IP address of each allowed
SNMP manager.
Assigning SNMP Community Names and Access Types
The unit can be managed by an SNMP manager supporting SNMP. The
community name must be supplied by an external SNMP manager accessing an
object in the MIB.
To define SNMP community names, follow this menu selection sequence:
Main Menu
→
Configuration
→
Load Configuration From
→
Edit
→
SNMP
→
General SNMP Management
Refer to Table A-8, General SNMP Management Options, to:
H Enable SNMP Management.
H Assign the SNMP community names of the SNMP Managers that are allowed
to access the units Management Information Base (MIB).
H Specify Read or Read/Write access for each SNMP community name.