Filter
Top Products
Configuration Option Tables
A-18
7984-A2-GB20-10February 1999
SNMP NMS Security Options
SNMP configuration options allow you to specify the information necessary to
support the Termination Unit SNMP NMS Security. To access the SNMP NMS
Security Options screen, follow this menu selection sequence:
Main Menu
→
Configuration
→
Load Configuration From
→
Edit
→
Management and Communication
→
SNMP
→
Security
main/config/management/security Hotwire
Slot: 4 Model: 7984
SNMP NMS SECURITY OPTIONS
NMS IP Validation: Enable
Number of Managers: 2
NMS 1 IP Address: 135.014.040.001 Clear Access Type: Read/Write
NMS 2 IP Address: 135.014.003.027 Clear Access Type: Read/Write
NMS 3 IP Address: 135.014.001.008 Clear Access Type: Read
NMS 4 IP Address: 135.014.002.024 Clear Access Type: Read
NMS 5 IP Address: 204.128.146.035 Clear Access Type: Read
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
S
ave
Table A-8. SNMP NMS Security Options (1 of 2)
NMS IP Validation
Possible Settings: Enable, Disable
Default Setting: Disable
Specifies whether security checking is performed on the IP address of SNMP
management systems attempting to access the node.
Enable – Security checking is performed on the IP address of SNMP management
systems attempting to access the node.
Disable – No security checking is performed.
Number of Managers
Possible Settings: 1, 2, 3, 4, 5
Default Setting: 1
Specifies the number of SNMP management systems that can send SNMP messages.
1 to 5 – Number of trap managers. An NMS IP address is required for each manager.