Filter
Top Products
Testing
5-5
7984-A2-GB20-10
February 1999
DTE Loopback
DTE Loopback loops the DSX signal back to itself before the signal is sent to the
Framer.
CAP
DSL
Port
DSX-1
Port
CAP T1
LIU
FramerFramerTransceiver
98-16110
All Ones
" Procedure
To run a DTE Loopback:
1. Position the cursor at the Start command next to DTE Loopback on the
Network Tests screen.
2. Press Enter.
The Start command is changed to Stop.
3. To manually stop the test, verify that the cursor is positioned at the Stop
command.
4. Press Enter.
A DTE Loopback cannot be started when any other loopback test is in progress.