Filter
Top Products
Operator Functions • 3
3-5SV40221 Rev. A
Automatic Processing
After confirming a Trial Piece is OK...
Press the Start key to commence automatic operation.
The machine will operate until:
material runs out
the Stop key is pressed
the batch count is reached (if batch count is being used)
If you choose No...
The adjustment(s) you have just changed will only be
retained while you are running the current job. If another Job
Definition is selected or if power is turned off, next time the
original Job Definition is selected, the modified adjustment(s)
will have returned to the value saved within the Job
Definition.
TIPS:
If you reload material during a run which seems to have
different characteristics (weight, colour shade, etc.), or if
you have any problems with double detect, run another
Trial Piece. This allows the machine to recalibrate the
double detect function for the new material in case the
batches vary slightly.
When loading a C-folded insert into feeder F or G,
load it with the open edge last and the double sheet
thickness face up.
Batch Count
If the Batch Count function was set when the job was created, the
machine will stop automatically after processing the required number
of Mail Pieces. Remove the batch of Mail Pieces and press Start to
recommence processing.
SV40221 Rev A book.indb 3-5 9/14/2004 5:51:10 PM