Filter
Top Products
6 • Troubleshooting
6-8 SV40221 Rev. A
Clearing Material Stalls
Your machine has been designed to assure maximum performance.
In the event of a material stall, the display will indicate where the stall
has occurred and will suggest remedial action.
First press Clear Deck to attempt to feed the material through the
machine. If not successful, the sections below tell you how to gain
access to the material.
The Manual Advance Knob
Having located the material,
you may need to use the
Manual Advance Knob to
manually feed material out of
the grip of rollers, etc.
The Manual Advance Knob
is located behind the lower
door at the center front of the
machine.
SV40221 Rev A book.indb 6-8 9/14/2004 5:51:24 PM