Filter
Top Products
Optical Mark Recognition (OMR) • 5
5-19SV40221 Rev. A
Setting the Top Scanner Position
This scanner position is used for C and Double Folds.
Open the Top Cover and locate the blue Top Scanner adjusting knob
and adjustment scale for the side the scanner is fitted.
Rotate the adjusting knob until the indicator is aligned with the
measurement (X) you just made.
The Top Scanner will now be aligned.
Top Scanner
Adjusting Knob
Adjustment
Scale
Indicator
NOTE: Illustration shows adjustment for a front scanner. If using a
rear scanner, refer to the scale towards the rear of the machine.
Rear Adjustment
Scale
Front Adjustment
Scale
SV40221 Rev A book.indb 5-19 9/14/2004 5:51:21 PM