Polycom 5.3 Webcam User Manual


 
Polycom CMA System Web Scheduling Guide
36 Polycom, Inc.
If you select Call Details, you’ll see these participant details:
If you select Call Quality of Service, you’ll see these standard service
measurements: Total Packet Loss, % Packet Loss, Audio Packet Loss,
Video Packet Loss, Audio Jitter, and Video Jitter.
ISDN Line Status The status of the ISDN line. Possible values include:
Operational
Non-operations
This field is blank for the following device types: PVX,
MGC, RMX, GW/MCU, Other, and TANDBERG.
Alias Type If the endpoint has an alias designation, the type of alias.
Possible types include E.164, H.323 ID, URL, Transport
Address, E-mail, Party Number, and Unknown.
Alias Value Value for the alias type shown.
Setting Description
Setting Description
Video Protocol The video connection protocol, both transmission (Tx)
and reception (Rx), the endpoint is using. Possible values
include:
H.261
H.261 is an ITU standard designed for two-way
communication over ISDN lines and supports data
rates which are multiples of 64Kbit/s. H.261 supports
CIF and QCIF resolutions.
H.263
H.263 is based on H.261 with enhancements that
improve video quality over modems. It supports CIF,
QCIF, SQCIF, 4CIF and 16CIF resolutions.
H.264
Video Format The video format, both transmission (Tx) and reception
(Rx), the endpoint is using.
Video Rate The video bandwidth negotiated with the far site.
Video Rate Used The actual video bandwidth used in the call to the far site.
Video Frame Rate Specifies the frame rate to use.
Audio Rate The audio bandwidth negotiated with the far site
Audio Protocol The audio connection protocol, both transmission (Tx)
and reception (Rx), the endpoint is using.