Filter
Top Products
Command Line Interface (CLI) AP-4000 Series User Guide
Parameter Tables
186
– Hardware Configuration Reset - Disable or enable hardware configuration reset and configure a configuration
reset password.
– Other Parameters - Configure Security Profiles that define allowed security modes (wireless clients), and
encryption and authentication mechanisms.
• VLAN/SSID Parameters - Enable the configuration of multiple subnetworks based on VLAN ID and SSID.
• Other Parameters
– IAPP Parameters - Enable or disable the Inter-Access Point Protocol
– Wireless Multimedia Enhancements (WME)/Quality of Service (QoS) parameters - Enable and configure Wireless
Multimedia Enhancement/Quality of Service parameters, QoS policies, mapping priorities, and EDCA parameters.
Apply a configured QoS policy to a particular SSID.