Proxim AP-4000 Network Card User Manual


 
Advanced Configuration AP-4000 Series User Guide
Network
46
Network
The Network tab contains the following sub-tabs:
IP Configuration
DHCP Server
DHCP Relay Agent
Link Integrity
SNTP (Simple Network Time Protocol)
IP Configuration
This tab is used to configure the internet (TCP/IP) settings for the access point.
These settings can be either entered manually (static IP address, subnet mask, and gateway IP address) or obtained
automatically (dynamic).The DNS Client functionality can also be configured, so that host names used for configuring the
access point can be resolved to their IP addresses.
Figure 4-3 IP Configuration Sub-tab
You can configure and view the following parameters within the IP Configuration sub-tab:
NOTE: You must reboot the Access Point in order for any changes to the Basic IP or DNS Client parameters to take
effect.