Filter
Top Products
B – Command Line Interface
Set Config Command
B-26 59021-05 A
ALFairness Arbitration loop fairness. Enables (True)
or disables (False) the switch’s priority
to arbitrate on the loop.
ARB_FF Use ARB_FF instead of idles on loop
FCAL option
InteropCredit Interoperability credit. The number of
buffer-to-buffer credits per port. 0
means the default (12) is unchanged.
ExtCredit Extended credits. The number of port
buffer credits that this port can acquire
from donor ports.
FANEnable Fabric address notification. Enables
(True) or disables (False) the
communication of the FL_Port address,
port name, and node name to the
logged-in NL_Port.
LCFEnable Link control frame preference, R_CTL =
0xC
MFSEnable Multi-Frame Sequence bundling
MFS_TOV MFS limit for camp on
MSEnable Management Server enable on this port
NoClose Don't close unless another device
arbitrates
I/O Stream Guard Enables or disables the suppression of
RSCN messages
VIEnable Enable VI preference routing
CheckAlps Close before sending frames to new
target
Table B-7. Set Config Port Parameters (Continued)
Parameter Description