Filter
Top Products
5 – Diagnostics/Troubleshooting
POST Diagnostics
5-4 59021-05 A
c. Activate binary mode and copy the configuration file from the
workstation to the switch. The configuration file must be named
"configdata".
ftp>bin
ftp>put configdata
d. Close the FTP session.
ftp>quit
e. Establish communications with the switch using Telnet. Enter one of
the following on the command line:
telnet xxx.xxx.xxx.xxx
or
telnet switchname
where xxx.xxx.xxx.xxx is the switch IP address and switchname is the
switch name associated with the IP address.
f. A Telnet window opens prompting you for a login. Enter an account
name and password. The default account name and password are
(admin, password).
g. Open an admin session to acquire the necessary authority.
cli $>admin start
h. Restore the configuration file.
cli (admin) $>config restore
i. Reset the switch and close the Telnet session.
cli (admin) $>reset