Filter
Top Products
4 – Installation
Installing a Switch
4-4 59021-05 A
To mount the switch in a rack, do the following:
1. Ensure that the19-inch rack meets the following standard specifications:
■ ANSI/EIA RS-230 Standard, entitled Cabinets, Racks, Panels, and
Associated Equipment
■ MIL-STD- 189, entitled Racks, Electrical Equipment, 19-Inch and
Associated Panels
2. Mount the brackets on the front or rear corners of the chassis as shown in
Figure 4-2.
3. Place the switch in the rack and secure it with four 10-32 x .625” machine
screws (not supplied).
Figure 4-2. Installing Rack Mount Brackets
4.2.2
Install SFP Transceivers
The switch will support a variety of interconnection media. Refer to ”SFP
Transceivers” on page 6-2 for information about removing and installing SFP
transceivers.