Filter
Top Products
1–Product Overview
Multi-boot Image for 10Gb Converged Network Adapter—CNA Function Configuration
1-6 SN0054671-00 B
Converged Network Adapter Function Configuration Package
Contents
The following files are included for updating the adapter multi-boot code:
update.bat—DOS batch file that calls the executable files to update the
adapter multi-boot.
QLflash.exe—Utility to update multi-boot code and firmware.
DOS4GW.exe—This file is required to use the QLflash.exe.
p3pyyyyy.bin—Combined binary file, which includes the binaries for the
BIOS, UEFI, PXE, and firmware.
Using QLflash
QLflash is a native DOS utility. Refer to the Readme file for more information. To
run this utility, boot to a DOS hard drive or USB removable drive.
Utility Version:
/VER = Display version of the QLflash utility
Help Options:
/? = Help menu
Updating the Multi-boot Code
To write the multi-boot code to Flash memory:
1. Insert the QLogic Adapter in the system.
2. Boot to DOS.
3. Run the update script at the command prompt:
C:\>update.bat
This script program updates the multi-boot image on the adapter.
4. Reboot the system.
NOTE:
You can also use the QConvergeConsole (QCC) GUI/CLI to flash the
multi-boot image. After the multi-boot code is updated, power cycle the
server for the new changes to take effect.