Filter
Top Products
2–Configuring NIC
VLAN Configuration
2-14 SN0054671-00 B
Configuring NIC Driver Parameters with QCC Interactive CLI
Refer to the QConvergeConsole CLI User's Guide: section 7, “NIC Interactive
Commands,” for information.
Configuring NIC Driver Parameters with QCC Non-Interactive
CLI
Refer to the QConvergeConsole CLI User's Guide, section 4, “NIC Noninteractive
commands,” for information.
VLAN Configuration
VLAN Configuration with QCC GUI
Refer to the QConvergeConsole Help System: Setting Advanced NIC Port
Parameters for information.
VLAN Configuration with the QCC Interactive CLI
Refer to the appropriate section in the QConvergeConsole CLI User's Guide for
information.
VLAN Configuration with the QCC Non-Interactive CLI
Refer to the appropriate section in the QConvergeConsole CLI User's Guide for
information.
Teaming/Bonding
Windows Teaming
You can group together multiple network adapters in a server to make a team.
Individual adapters that are part of a team operate as a team rather than
standalone adapters. A team provides traffic load balancing across the member
adapters and fault tolerance when some, but not all, of the members lose
connectivity.
To enable teaming functionality, install the teaming driver in addition to the basic
NIC.