Filter
Top Products
2–Configuring NIC
Configuring Driver Software Parameters
2-6 SN0054671-00 B
13. Select the Embedded NIC 1 QLogic PXE... entry, and then press the UP
ARROW key to move this entry to the first position (Figure 2-4).
Figure 2-4. Embedded NIC 1 QLogic PXE
14. Press the ESCAPE key, and then select Save changes and exit.
The system reboots.
15. After the system reboot, follow the screen prompt for PXE boot server for the
installation of OS of your choice.
Configuring Driver Software Parameters
Linux NIC Driver Management Applications
Overview
The following sections describe how to configure and manage the driver and
adapter using Linux management utilities.
Viewing and Changing Adapter Properties on Linux
Use the following Linux utilities to view and change adapter properties:
“qaucli Utility” on page 2-7
“ethtool Utility” on page 2-7