Filter
Top Products
Chapter 5 Running Diagnostic Programs
Running the Move Medium Test
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 89
Running the Move Medium Test 5
The
Move Medium test simulates the movements performed when
a SCSI
Move Medium command is received via the SCSI interface.
To run the
Move Medium test:
1 Access the Diagnostics Menu screen (see Accessing the
Diagnostics Menu Screen on page 85).
2 Press the Up and Down buttons to select General.
3 Press Select.
The GUI displays the
Diags: General screen (see figure 48).
4 Press the Up or Down buttons to select Move Medium.
5 Press Select.
The GUI displays the
Move Cartridge FROM screen (see
figure 50
). A flashing arrow indicates the currently selected
source element.
Figure 50 Sample
Move Cartridge FROM
Screen
6 Press the Level button to select the level when the desired
source element is located.