Filter
Top Products
Chapter 3 Changing the Library Configuration
Changing the Short Labels Setting
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 63
Changing the Short Labels Setting 3
The
Short Labels option controls how many bar code label
characters are returned when the host issues a
Read Element
Status
command. When Short Labels is set to:
•
Off, all of the bar code label characters are returned
•
On, only the first six characters of the bar code label are
returned
To enable or disable
Short Labels:
1 Access the Configuration screen (see Accessing the
Configuration Screen on page 53).
2 Press the Up or Down buttons until Short Labels is highlighted.
3 Press Select.
4 Use the Up or Down buttons to select the desired Short Labels
setting. The available settings are
Enabled and Disabled.
5 Press Select.
6 To return to the Configuration screen without changing the
option setting, press
Cancel.
7 Press Main to return to the main screen.
Note: The default setting is Disabled.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.