Filter
Top Products
Chapter 5 Running Diagnostic Programs
Running the Move Medium Test
90 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
7 Press the Up and Down buttons to select the source element of
the cartridge.
8 When the flashing arrow is next to the desired source element,
press
Select.
The GUI displays the
Move Cartridge TO screen (see figure 51).
A flashing arrow indicates the currently selected destination
element.
Figure 51 Move
Cartridge TO Screen
9 Press the Level button to select the level where the desired
destination element is located.
10 Press the Up and Down buttons to select the destination
element for the cartridge.
11 When the flashing arrow is next to the desired destination
element, press
Select.
The GUI displays the
Confirm Move Cartridge screen (see
figure 52
).