Filter
Top Products
Chapter 1 Overview
Library Features
8 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Table 3 Front Panel
Features
Feature Description
Operator
control panel
The operator control panel consists of the following elements:
•Graphical user
interface (GUI)
The GUI displays library status information and allows
you to access the library menus. These menus allow you to
view or change the library settings, run demonstration
programs, or run diagnostic tests.
The GUI is discussed in detail in this book.
•Five GUI
buttons
Use these buttons in combination with the GUI to scroll
through screens and select options or commands. The
functionality of these buttons changes depending on the
currently displayed GUI screen.
• Magazine
door buttons
Pressing these buttons opens the magazine doors, if the
magazines have already been released using the
Mags
option on the GUI (see Removing the Magazines
on
page 38).
• Light emitting
diode (LED)
indicators
The operator control panel has two LED indicators:
• The green LED lights when the library is fully
operational and ready to accept host commands. It
flashes while the library is transitioning from a READY
state to a NOT READY state. The library will not be
READY during power-on self-tests, when magazines
are being released, or during access to certain menu
items.
• The red LED lights when there is a library error.
• Both LEDs flash when there is a library fault that
requires operator attention.
Magazine
access doors
These doors protect the data cartridge magazines.
Viewing
window
This window allows you to view the library robotics while the library is
operating.