Filter
Top Products
Chapter 4 Performing Maintenance Operations
Cleaning a Tape Drive
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 79
Cleaning a Tape Drive 4
To clean a tape drive:
1 Access the Maintenance screen (see Accessing the Maintenance
Screen).
2 Press Clean.
The GUI displays the
Select Cleaning Cartridge screen (see
figure 41
). A flashing arrow indicates the currently selected
source element.
Figure 41 Select
Cleaning Cartridge
Screen
3 If the library is an L25 in a multiple library stack or an L100,
press the
Level button to select the level where the cleaning
cartridge is located.
4 Press the Up and Down buttons to select the source element that
contains the cleaning cartridge.
5 When the flashing arrow is next to the source element that
contains the cleaning cartridge, press
Select.
The GUI displays the Select Tape Drive screen (see figure 42). A
flashing arrow indicates the currently selected drive.