Filter
Top Products
Chapter 5 Running Diagnostic Programs
Running the Move Medium Test
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 91
Figure 52 Sample
Confirm Move
Cartridge Screen
12 Verify that the GUI displays the correct source and destination
elements, then press
Confirm.
The GUI displays the
Diag: Move Medium screen, which
prompts you to set the cycle count (see figure 53
). The
rightmost number is highlighted.
Figure 53 Diag: Move
Medium Screen
13 Press the Up and Down buttons to change the highlighted
number.