Preface
xiv Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
• Chapter 3, Changing the Library Configuration, explains how
to change the library configuration using the GUI
Configuration screen.
• Chapter 4, Performing Maintenance Operations
, explains how
to perform library maintenance operations using the GUI
Maintenance screen.
• Chapter 5, Running Diagnostic Programs
, explains how to use
the library’s built in diagnostic programs.
• Chapter 6, Running the Demonstration Programs
, explains
how to run the library demonstration programs.
• Appendix A, Specifications
, lists the specifications for the L25
and L100 libraries.
• Appendix B, Fault Symptom Code (FSC) Dictionary
, lists the
fault symptom codes (FSCs) for the L25 and L100 libraries.
• Appendix C, DLTtape Cartridge Maintenance
, provides
guideline for handling DLT cartridges and visually inspecting
them if necessary.
• Appendix D, Regulatory Statements
, provides regulatory
information for the L25 and L100 libraries.
This document concludes with a glossary and a detailed index.
Notational
Conventions
This document uses the following conventions:
Note: Notes emphasize important information related to the
main topic.
Tech Tip: Tech Tips provide technical information that may be
helpful in performing the procedure.
Caution: Cautions indicate potential hazards to equipment
and are included to prevent damage to equipment.