Filter
Top Products
74
Advanced Settings
75
Advanced Settings
CONV Priority Scan
When Object Priority is set to Yes for one or more CONV objects,
the scanner will sample the CONV objects for activity periodically
while scanning and monitoring other objects. This sampling will
cause a brief muting of received audio when it occurs while another
object is active. The more CONV objects that are set for Priority, the
longer this audio muting will be, since it takes a certain amount of
time to sample each Priority CONV object for activity.
TGRP Priority Scan
When Object Priority is set to Yes for one or more TGRP objects,
the scanner will give those TGRPs priority over other TGRPs while
checking a particular trunking system for activity. TGRPs configured
for Priority are checked for activity before any other TGRPs are
checked, and during the reply delay time after non-priority TGRP
calls.
Additionally, your PRO-197 decodes the subaudible priority data that
is present on analog Motorola talkgroup calls (3600 baud control
channel systems only), and will switch to a priority talkgroup when
the data for that talkgroup is found in the subaudible priority data.
Hit Counters
The Hit Counter feature that keeps track of how many transmissions
are received for each object type. The Hit Counter for an object
is incremented each time a transmission is received on an object,
making it possible for you to determine the objects that are the least
and most active. By default, the Hit Counter feature is turned off.
To turn the Hit Counter on:
1. Press
PROG.
2. Press GLOB softkey.
3. Press q to scroll to Hit Counts.
4. Press t or u to select Yes or No.
5. When finished, press the SAVE softkey to save your changes to
the radio’s configuration memory.
To view Hit Counts:
1. Press
PROG.
2. Press p, q, t or u to navigate to the desired object, if
necessary.
3. Press EDIT softkey, then CURR softkey.
4. Scroll to Hit Count in the object menu to view the hit counter.
To reset for a single object:
1. Press the
Dflt softkey while the Hit Count item is selected in the
object’s menu.
To clear all hit counters:
1. Press the
PROG to enter Program Mode.
2. Press GLOB softkey.
3. Press q to scroll to Clear Hits.
4. Press SEL.
5. Press the SAVE softkey to save your changes and exit the Global
settings menu.
Audible Alarms and the Alert LED
Your PRO-197 features an Alert LED with audible alarm capability
that allows you to set different visual and audible notifications for the
different types of objects you create.