Filter
Top Products
22
Beyond the Basics
2. In the marine, CB and FRS bands, you can directly select
a channel or search through the band. When M appears
on the left on the second line, you can directly select a
channel (see “Search Bank Charts”). Use the numeric
keypad to select a specifi c two-digit channel number (for
example, press 1 6 to select Channel 16, or 0 5 to select
channel 5). You can also change the channels by pressing
e or d.
There are several group banks in the SR3 Police/Fire and
SR5 ham bands. You can turn on the groups by pressing
the group numbers. For example, to turn on group 0,
press 0.
3. Press FUNC, SRCH while M appears in SR0, SR1 or SR2. M
changes to S. Then search through the band. To return to
the previous mode, press FUNC, SRCH.
4. Rotate SQ clockwise and leave it set to a point just after
the hissing sound stops. After two seconds (if the delay
feature is on), the received frequency appears and the
scanner starts searching.
5. When the scanner fi nds an active frequency, it stops
searching, and resumes when the transmission ends. If
delay is programmed with the search range the scanner
will pause for a reply before search resumes.
search bank charts
Search bank: SR0 Marine band
For some Marine frequencies, two frequencies are
assigned to one channel, for example, 157.000 and
161.600 are assigned to Channel 20.
Note
Note