Filter
Top Products
68
Beyond the Basics
6 is the sixth number associated with 1 on the keypad.
Press 1, 6.
5. Press ENT to store the text with the channel.
assigning a text tag to a group ID
1. Press PROG.
2. Press TRUNK.
3. Press FUNC then
e or d to select the desired bank.
4. Press TRUNK to select the desired sub-bank.
5. Press or hold down
e or d to select the desired group ID.
6. Press TEXT, then enter text using the number keys (see
“Text Input Chart” on Page 69). Use
e, d or CLEAR to edit
your entry, or hold down CLEAR to delete the text entry.
7. Press ENT to store the text with the ID.
assigning a text tag to a
channel-storage bank
1. Select a channel in the desired channel storage bank
by pressing MAN and entering the channel storage bank
number (000 for bank 0 or 200 for bank 2). Press MAN again.
2. Press PROG.
3. Press FUNC, 7. A cursor appears on your display.
4. Enter the text using the keypad. (See “Text Input Chart”).
Use
e, d or CLEAR to edit your entry, or hold down CLEAR to
delete the text entry.
5. Press ENT to store the text with the bank.