Filter
Top Products
66
Beyond the Basics
Use the following keystrokes to navigate through the ID lists:
• Press PROG, TRUNK to enter the ID list for the current channel
storage bank.
• Press and release
e or d to scroll through one at a time.
• Press and hold e or d to rapidly scroll through ID memories.
• Press TRUNK to advance to the next ID sub-bank.
• Press FUNC
e or d to advance to the next or previous ID list.
6. If you want to tag the ID, press TEXT.
7. Enter the desired text tag for the ID.
8. Press ENT. (See “Text Input Chart”).
9. To store the next ID memory in sequence, press
e and
repeat Step 5.
10. Press SCAN to start scanning.
When automatically storing trunked IDs in the ID list by
pressing TRUNK during a trunked transmission, the scanner
automatically stores the active ID in the next available open
ID storage location in the ID list. We suggest leaving ID sub-
bank 0 empty when fi rst setting up an ID list. This provides a
location for new auto-store IDs to be placed and organized.
You can enter either decimal or AFS code for ED (EDACS)
ID. The default setting is decimal ID entry. To toggle
between AFS or decimal EDACS ID display, press FUNC,
2. AFS format appears on the display for about two
seconds. Now you can enter EDACS ID codes in AFS
format.
If you entered an ID code that is already stored in another
ID channel, Dupl ID appears. If you want to store the ID
code anyway, press ENT. To cancel the operation, press
CLEAR.
When you try to store more than 150 talkgroup IDs in a
bank, Memory full! appears on the display.
Notes
Notes