Filter
Top Products
34
Beyond the Basics
You can still manually select and monitor locked-out
channels.
Locking out a channel with an active trunking control channel
will disable monitoring of that trunking system.
To remove the lockout from a channel, manually select the
channel and press L/OUT so L disappears.
To review all locked out channels, press MAN. Then,
repeatedly press FUNC, L/OUT. The scanner advances to the
next locked out channel each time you press FUNC, L/OUT.
locking out frequencies
To lock out a frequency during a search, press L/OUT when the
scanner stops on that frequency. The scanner locks out the
frequency and continues searching.
• You can lock out as many as 50 frequencies in each search
bank. If you try to lock out more, Memory full! appears,
and you will be unable to lock out any more frequencies
until you clear some. See “Clearing Locked-Out Search
Frequencies”.
• If you lock out all frequencies in one search bank and only
this search bank is activated, All ranges Locked out! appears
and the scanner will not search.
reviewing locked-out search frequencies
To review the frequencies within a search bank that you
locked out:
1. Press SRCH to set search mode, and select the desired
search bank to review its locked out frequencies.
2. Press FUNC and then L/OUT. The last locked-out frequency
and Lockout list appear. Press
e or d to scroll through the
list. The locked-out number and the total locked-out
number also appears as L/O XX of YY. (The tenth of twenty
Note
Note
Note
Note