Filter
Top Products
67
Beyond the Basics
text tags
assigning a text tag to a channel
1. Navigate to the channel you want to label using direct
channel entry, e,
d
or FUNC e or d.
2. Press PROG. M in the display changes to P to indicate
program mode.
3. Press TEXT. A cursor appears.
4. Enter the text using the number keys (see “Text Input
Chart” on Page 69). If you make a mistake, press
e or d to
move to the character you want to change, press CLEAR to
backspace and delete unwanted characters, or hold down
CLEAR to abort the text entry. For example, to identify a
channel as FIRE Ch 6 (for Fire Channel 6):
F is the third letter (of DEF) associated with 3 on the
keypad. Press 3, 3.
I is the third letter (GHI) associated with 4 on the keypad.
Press 4, 3.
R is the third letter (PQRS) associated with 7 on the
keypad. Press 7, 3.
E is the second letter (DEF) associated with 3 on the
keypad. Press 3, 2.
Press ./DELAY for the space.
C is the third letter (ABC) associated with 2 on the keypad.
Press 2, 3.
h is the second letter (GHI) associated with 4 on the
keypad. Press 4, and then FUNC (for the lower case set),
and then press 2.
Press ./DELAY for the space.