Filter
Top Products
29
Beyond the Basics
frequency copy
You can copy a frequency into a specifi ed channel, a vacant
channel in a specifi ed bank, or a priority channel. This feature
lets you easily store frequencies of interest you encounter
while searching or tuning. You cannot copy a frequency from
the Marine search bands.
copying a frequency into a specifi ed channel
You can copy a frequency into a channel you specify when
the scanner stops on that frequency during search mode
or when you manually tune it. If a CTCSS or DCS code
is detected on the transmission, the scanner copies the
detected code into the channel memory as well.
If you try to copy a frequency that is already stored, the
scanner sounds a tone after you press ENT. Dupl.f Chxxx appears
at the bottom line. To copy the duplicate frequency anyway,
press ENT. Otherwise, press CLEAR to cancel.
1. Press FUNC, PROG when you fi nd a frequency. Chan Store?
appears on the bottom line. After about one second, the
frequency to be copied fl ashes on the indicator.
2. Press the desired bank number and channel number
where you want to store the frequency. The bank and
channel number, then the frequency appear. You can
repeat this step as needed until you fi nd an acceptable
destination channel. After about one second, the
frequency to be copied fl ashes.
3. Press ENT. All the conditions, such as receive mode and
delay condition, are copied onto the channel. Chan Store!
briefl y appears. The scanner automatically returns to
search mode.