Filter
Top Products
52
Beyond the Basics
appears under the bank’s number while scanning. When you
set a channel storage bank to Closed Mode, - appears under
the channel storage bank’s number while scanning.
Traffi c on locked out talkgroup IDs is ignored when the
scanner is operating in Open and Closed Modes.
In Open Mode, the scanner will stop on all talkgroup traffi c,
except for traffi c on talkgroups that are entered in the ID
list and locked out. In Closed Mode, the scanner will only
stop on talkgroup traffi c if the ID is entered in the ID list
and not locked out. Open Mode scanning is useful in cases
where you wish to monitor all traffi c on the trunked system,
except for certain talkgroups which you specify by entering
them into the ID list and locking them out. Open Mode
scanning allows you to search the trunking system for new or
previously unknown talkgroup activity while ignoring traffi c
on undesired talkgroups.
Closed Mode scanning is useful when you want to restrict
monitoring to only the talkgroups you specifi ed in the ID list.
toggling open and closed modes
To toggle Open or Closed Mode state for a bank, press FUNC,
5 while stopped on a channel in the bank in SCAN, MAN or
PGM modes. The scanner will briefl y display Bank OPEN or
Bank CLOSED to indicate the new Open or Closed state for the
bank.
manual ID lockout toggle
1. Press PROG.
2. Press TRUNK.
3. Press FUNC, and then
e or d to move to the desired bank.
4. Press
e or d to select the ID memory.
5. Press L/OUT to toggle the lock out status of the selected ID.