Filter
Top Products
59
Beyond the Basics
using PC application software.
Motorola 800MHz splinter systems
Certain 800 MHz Motorola trunked radio systems operate
using splinter channels that are in between the channels in
the normal 800 MHz band plan. These systems are known as
“splinter systems”. Your scanner features an offset mode to
allow reception of these systems.
If the radio appears to be trunking to the wrong
frequencies when monitoring an 800 MHz system, you
should try to confi gure the system for splinter operation.
Splinter systems exist only in the 800 MHz band, and only
use the 3600 bps control channel type. Setting splinter
confi guration on VHF, UHF, 900 MHz and 800 MHz
APCO-25 systems will have no effect.
1. Press PROG, TRUNK to enter ID program mode.
2. If necessary, press FUNC, and then
e or d to select the
desired bank.
3. If necessary, press MODE to select Motorola trunking mode.
4. Press FUNC, 3 to edit 3600 CC Mode.
5. Press
e or d to select Normal, Splinter, Table, or Multi
Table, and then press ENT.
fl eet maps
You must set the fl eet map if you want to receive a Motorola
Type I system. Fleet maps are included along with other
information about Motorola Type I systems at
www.trunkscanner.com. The default setting of the bank is for
Motorola Type II.
1. Press PROG, TRUNK.
2. Press FUNC, and then
e or d to select the desired bank.
3. Press FUNC, 8. Block 0 size code. Use 15 for type II. S-00 appears.
Note
Note