Filter
Top Products
40
Beyond the Basics
Follow these steps to edit the V-Scanner name stored in Line
4 of the Welcome screen:
1. Press PROG.
2. Press FUNC, TEXT. The following text appears on the display:
P708---D-+CT
Welcome Ln-4
3. Use standard text entry procedures to enter a V-Scanner
name, up to 12 characters long. Press ENT when fi nished.
Refer to the “Text Input Chart” on Page 69 for more
information on text entry.
You can only change the name of a V-Scanner while it is
loaded into working memory. It is not possible to change the
V-Scanner folder name from the V-Scanner menus. Always
press FUNC, TEXT while in program mode to assign a V-Scanner
folder name to the current working memory. This name
will be stored with the V-Scanner when it is saved, and will
appear while you are performing V-Scanner operations. If
you press TEXT while in a V-Scanner operations menu, you
will be prompted to use FUNC,TEXT while in program mode to
assign or change the name of the V-Scanner folder.
using V-scanner
1. Press PROG
2. Press FUNC, PROG. The following text appears:
V-Scanner
1-SAVE 3-DEL
2-LOAD S-CLN
CLR to EXIT
3. Select the option that you wish to execute.