Filter
Top Products
53
Beyond the Basics
activate ID lockout while scanning
When scanning a trunked radio system in Open Mode, you
can lock out a trunked ID by pressing L/OUT while the scanner
is stopped on a voice call. If the ID has not been previously
entered into the ID list for that bank, it will be added and
locked out automatically. When scanning a trunked radio
system in Closed Mode, it is possible to lock out an ID by
pressing L/OUT while the ID is active with a voice call.
reviewing locked-out talkgroup IDs
You can easily review and clear locked talkgroup IDs in the
ID list. This process is similar to fi nding and clearing locked
out conventional channels, except it is performed while in a
trunked ID list.
1. Press PROG and then TRUNK.
2. Press FUNC, and then L/OUT. The fi rst locked out ID in the ID
list is displayed.
3. Press L/OUT to unlock the selected ID, or press FUNC, and
then L/OUT again to continue reviewing locked IDs.
changing from ID text tag display
to ID code display
By default, your scanner displays the stored alphanumeric
text tag when receiving a trunked voice call. You can toggle
the display to show the text tag or the talkgroup ID code
by pressing TEXT while the scanner is stopped on a trunked
talkgroup call.
trunked delay function
The trunking ID delay is set separately from the channel
delay on a per channel storage bank basis. Trunking ID
delay specifi es the amount of time the scanner dwells on
the control channel looking for reply traffi c on the previous