Filter
Top Products
48
Beyond the Basics
3. Connect the two radios together using a male 1/8” phone
plug to male 1/8” phone plug cloning cable. The local
radio will handshake with the remote radio to prepare for
the cloning session. During V-Scanner selective cloning
operations, the local radio controls the session for both
sending and receiving folders to and from the remote
radio.
4. In addition to the two options indicated on the display,
you can browse the V-Scanner contents on both radios
simultaneously by pressing SRCH on the source radio.
Press CLEAR to exit.
5. To send a V-Scanner folder from the local radio to the
remote radio, press
e. Use 0-9 and . to select the source
V-Scanner folder. The name of the source folder appears
on the display. You can browse the V-Scanner contents
by pressing 0-9 and . in succession until the desired folder
is located. Press e or d to move between the source
and destination folder fi elds. Use 0-9 and . to select the
destination V-Scanner folder where you wish to store
the sent data. Again, you may browse the V-Scanner
contents on the remote scanner by pressing 0-9 and . until
the desired folder is located. Once you have selected the
desired source and destination folders, press ENT to send.
You may abort the send operation by pressing CLEAR.
6. To receive a V-Scanner folder from the remote radio
into the local radio, press the
d key. Use 0-9 and . to
select the destination V-Scanner folder where you wish
to store the received data. The name of the destination
folder appears on the display. You can browse the local
V-Scanner contents by pressing 0-9 and . in succession
until the desired folder is located. Press e or d to move
between the destination and source folder fi elds. Use 0-9
and . to select the source V-Scanner folder where you
wish to store the sent data. Again, you may browse the
V-Scanner contents on the remote scanner by pressing