Filter
Top Products
30
Beyond the Basics
copying a frequency to a vacant channel
into a specifi ed bank
You can copy a frequency into a vacant channel in a bank
you specify when the scanner stops on the frequency during
search or tune mode.
If you try to copy a frequency that is already stored, the
scanner sounds a tone after you press ENT. Dupl.f Chxxx appears
at the bottom line. To copy the duplicate frequency anyway,
press ENT. Otherwise, press CLEAR to cancel.
1. Press FUNC, ENT when you fi nd a frequency you want to
copy. Bank9 Store? appears.
2. To copy the frequency into bank 9, press ENT. The scanner
stores the frequency in the fi rst available vacant channel
in the bank. Otherwise, enter any bank number then
press ENT to store the frequency in the selected bank.
Chan Store! appears for two seconds. All the conditions,
such as receiving mode and delay condition, are copied
on the channel. After about two seconds, the scanner
automatically returns to search mode.
copying a frequency to the priority channel
You can copy a frequency into the priority channel (see
“Programming the Priority Channel”) when the scanner
stops on the frequency during Search, Scan, Manual, Tune,
or WX mode. Press FUNC, PRI when the frequency appears.
The display fl ashes twice and the frequency is copied to the
priority channel.